
Add to Cart
500 Kw Cummins Diesel Generator Set With Brushless Alternator For Factory
Generator Information:
1. Prime power 500KW / 625KVA, standby power 550KW / 688KVA.
2. Cummins engine with Engga alternator.
3. Smartgen Genset controller.
Technical Specification for Standard Genset:
Gen-set adopt 3 phases & 4 lines output, with output 400V / 230V, Frequency 50Hz, Power factor 0.8, Neutral point to earth and protective performance complies with NEMA1 and IP23 standard.
Genset Specifications:
Genset model | SCE688 |
Genset rated power | 500KW / 625KVA |
Rated voltage | 400/230V (adjustable) |
Rated current | 900 Amps |
Frequency | 50 Hz |
Power factor | 0.8 Lagging |
Connecting type | 3 phase 4 wire |
Cooling system | Closed cycle water-cooled with fan, water tank |
Overall dimension (L×W×H) mm | 3300×1250×1850 |
Gross weight (kg) | 5000 |
Engine Specifications:
Diesel Engine | |
Brand | CUMMINS |
Model | KTAA19-G6A |
Engine type | 6 cylinders in Line,4 stroke, direct injection |
Aspiration | Turbocharged and air-to-air aftercooled |
Rotating speed | 1500 RPM |
Engine cooling system | Water-cooled |
Speed governing system | Electronic speed governor |
Starting method | By 24V batteries |
Engine filter system | Dry type air filter ,fuel filter, oil filter, water filter |
Displacement(L) | 19 |
Bore×Stroke(mm) | 159×159 |
Compression ratio | 13.0: 1 |
100% Load fuel consumption (l/h) | ≤121.2 |
Lube capacity(L) | 38 |
Alternator Specifications:
Alternator | |
Brand | ENGGA |
Model | EG355-500N |
Excite type | Brushless self-excited AVR regulation |
Connecting type | 3 phase 4 pole |
Steady frequency change | 0.50% |
No load voltage | ≥95%-105% |
Steady voltage | ≤±1% |
Insulation class | Class H |
Protection grade | IP21 |
Control System
AMF Automatic Control Panel is the configuration for nobody on duty controlling generator sets. This kind of panel adopts module control system, with large LCD screen to show the menu. The module can receive output signal from ATS and realize automatic start and stop the generator set.
Why choose Cummins powered gensets?
1. Cummins engines which are made in China with the same standard of the US Cummins keep the quality almost the same as the US Cummins.
2. More than 90% of the Engines components and spares are made in China which keeps the cost much lower.
3. Cummins engines are universally just as Cummins factories all around the world; all the spares are universal which make the maintenance and reparation very simple.
4. Cummins has worldwide after-sales network, to whom you can get technical support and spares right near your house.
5. Engineers are more familiar with Cummins engines because they are most widely use in every filed and everywhere around the world.