Guangdong Sunkings Electric Co., Ltd
LOYAL & PROFESSIONAL GENERATOR SUPPLIER
Add to Cart
500KVA Industrial Natural Gas Generators AC Three Phase 1500Rpm 50Hz Biogas Genset
TECHNICAL DATA
| Genset model | SWG550 |
| Genset Rated Power Genset Standby Power | 400KW / 500KVA 440KW / 550KVA |
| Rated voltage | 400/230V (adjustable) |
| Rated current | 720 Amps |
| Frequency | 50 Hz |
| Power factor | 0.8 Lagging |
| Connecting type | 3 phase 4 wire |
| Cooling system | Closed cycle water-cooled with fan, water tank |
| Overall dimension (L×W×H) mm | 3300×1250×1800 |
| Gross weight (kg) | 4670 |
| Diesel Engine | |
| Brand | WEICHAI |
| Model | CW6200 |
| Engine type | 6 cylinders in Line, 4 stroke, direct injection |
| Aspiration | Turbocharged and air-to-air intercooled |
| Rotating speed | 1000 RPM |
| Speed governing system | Electronic speed governor |
| Starting method | By 24V batteries |
| Engine filter system | Dry type air filter ,fuel filter, oil filter, water filter |
| Displacement(L) | 11.596 |
| Bore×Stroke(mm) | 200×270 |
| Compression ratio | 11.6:1 |
| Ignition Order | 1-5-3-6-2-4 |
| Alternator | |
| Brand | FARADAY |
| Model | FD5M1-4 |
| Excite type | Brushless self-excited AVR regulation |
| Connecting type | 3 phase 4 pole |
| Steady frequency change | 0.50% |
| No load voltage | ≥95%-105% |
| Steady voltage | ≤±1% |
| Insulation class | Class H |
| Protection grade | IP23 |
FEATURES
1. Deutz technology platform ,WoodWard high reliability components and control strategy.
2. In-line, water-cooling, wet sleeve, electronically controlled pre- mixing, sparking plug ignition,electric starting.
3. Closed-loop control and intelligent feedback make the control more accurate.
4. lntelligent fault diagnosis,Engine safety and protection,Knock monitoring.
APPLIED GAS:
Natural Gas, Biogas, City Sewage Gas, Landfill gas, Oil gas, Farm biogas, Coal mine gas,etc
Acceptable fuel gas pressure: 5~12kPa
CH4 content: for natural gas≥85% CH4 ,content:for biogas≥40%
Gas heat value≥5500kcal/Nm3 (23MJ/Nm3 ). Gen set output power will increase as the gas heat value increase, if use low heat value gas for fuel (Heat value<5500kcal/Nm3, it will lower the power efficiency.
Gas does't include free water or free materials (the size of impurities should be less than 5μm.)
H2S content≤200mg/NM³
NH3 content≤20mg/NM³
Impurities content≤30mg/NM³;size≤5μm
Water content≤40g/NM³, no free water.
